Blog Post

5 Pellet-Stove Maintenance Tips For Safe, Efficient Operation

  • By Admin
  • 07 Mar, 2018

Pellet stoves are very efficient heaters, but they require more maintenance than typical furnaces and woodstoves. Avoid performance and safety issues with your pellet stove by following these five tips.

1. Use High-Quality Pellets

When you use the best pellets, your heating costs may increase slightly compared to using lower-grade fuel. However, avoiding the soot buildup and other issues with low-grade pellets make the extra expense worth it.

Remember that pellets should have a low moisture content no higher than 10 percent. If your pellet stove also burns corn kernels, nut shells, and wood shavings, buy the best quality fuel of these types that is available.

Use fuel without multiple fillers and glues to avoid excess smoke and ash in your pellet stove. Also, look for pellets that are PFI certified for your intended use.

2. Check the Ash and Dust Content

Some pellet stoves can handle pellet fuel with a low or high ash content. Other pellet stoves may gum up or fail to burn properly if they're fed pellets of the wrong type. Check to make sure that your pellets are the right ash type for your stove. Top-fed pellet stoves are often designed to work best with low-ash pellets.

Continuous-feed hoppers and chutes on heaters are susceptible to sawdust accumulation in the same way that fans and chimneys collect ash and soot. Check your pellet supplies to ensure the integrity of the pellets is good. Avoid pellet bags with an abundance of sawdust and loose fuel at the bottom.

3. Have Your Pellet Stove Serviced Each Autumn

Schedule an inspection by your local fireplace and stove-repair service before cold weather arrives each fall. The pros know how to check for broken, missing, and dirty components on your pellet stove.

Some of the areas they check include:

  • Hopper

  • Augur

  • Pressure switches

  • Electrical wiring and switches

  • Igniter

  • Electrical, vacuum, and pressure sensors

  • Combustion or convection motor

The technician will also check your pellet stove's firewalls, burn pot, and chambers for proper operation. If necessary, you're advised to hire a professional cleaner for your specific type of exhaust system.

Another thing your stove professional will do is lubricate and replace parts as needed. For example, they’ll switch out a bent or corroded fan for a fresh replacement. This preseason check ensures that problems are spotted and fixed before temperatures drop so you and your household can have a cozy winter.

4. Raise Efficiency With a Soot Sweep

Pellets stoves require at least a weekly tidy to brush away collected sawdust, ash, and soot. Cleaning up the hopper and feed areas is not hard, but purchase a cleaning set with an efficient, ergonomic broom, whisk, and dust pan to make your job even easier.

Did you know that one tenth of an inch of soot on a metal surface can cut its heat transfer rate by half? Allow the stove to cool periodically so you can remove excess soot on a regular basis. Use fire-resistant tools for this job, and always dispose of ash properly to avoid fire danger. Pellet stoves are extremely safe when you follow this simple cleaning regimen every week.

5. Clean Your Stove's Window Periodically

Experts recommend you clean your pellet stove windows at least once a week to prevent the glass from completely blacking out your view. Soot, grime, and ash build up rapidly on the glass. If you wait until the end of the season, the cleanup may take a lot longer than a routine wipe-down.

Check your owner's manual for the correct window-cleaning methods for your pellet stove. Allow the glass to cool completely before you begin cleaning. You can use newsprint or lint-free cloth as a cleaning rag.

Ask your fireplace and stove repair service to recommend a cleaner for your pellet-stove glass if you prefer to use a commercial product. For a homemade solution, dampen the rag with vinegar. You can also use a rag dampened with water and dusted with wood ashes to wipe away the glass. Then, use water-dampened newsprint to wipe the class clear.

Allow the glass to dry thoroughly. Never use abrasive products or cleaners for ovens, as these products can mar the glass. You also don't want to introduce unsafe chemicals that create fumes when heated.

All appliances last longer and perform more efficiently when you keep up with recommended maintenance tasks. Take a moment right now to find your owner's manual for your pellet stove. Read over the recommended cleaning and other stove management tasks you should perform throughout the year.

If you don't have the manual — or can't locate it — you can find most owner's manuals online for your convenience. Alternatively, ask your HVAC and fireplace supply professionals to supply you with a manual.

Contact Hartman Heating, Air and Fireplaces today to schedule an inspection of your pellet stove, fireplace, or furnace. We install, service, and replace heating units of all types in the Sandy, Utah region.

By Admin 06 Jun, 2019
The healthiest air for people to breathe is within a certain humidity range. Discover what to know about humidity as a factor of indoor air quality.
By Admin 14 May, 2019
New construction gives people the ability to have great HVAC solutions. Learn about these key items for choosing the right HVAC system for your needs.
By Admin 14 May, 2019
Your home's building envelope is the separation between the inside and outside of your home. Improve it to make your HVAC system run more efficiently.
By Admin 13 Apr, 2019
Most people don’t enjoy being in an extremely hot room or an uncomfortably cold one. Slight temperature differences from room to room are common, but extreme variations can make your home quite unpleasant. Fortunately, temperature inconsistencies are fixable once you identify the problem.

If you are struggling with hot and cold rooms in your home, read on to learn more about common causes and possible fixes for these variations.
By ADMIN 01 Mar, 2019
What should you do if you don't have the money to replace your home’s HVAC system? Read this blog for a few tips and tricks you should try.
By Admin 31 Jan, 2019
Your home's building envelope is the separation between the inside and outside of your home. Improve it to make your HVAC system run more efficiently.
By Admin 26 Nov, 2018
Fireplace safety is crucial if you want to enjoy the warmth and charm your gas or wood fireplace provides. One way to keep your fireplace safe throughout the winter is by monitoring creosote buildup. An excessive buildup of creosote can prove dangerous for a variety of reasons, plus it can impact your fireplace's longevity.

Read on to learn more about creosote, how it affects your fireplace, and the steps you can take to keep your fireplace in good condition.


What Is Creosote?

Creosote is a combination of tars and various other chemicals produced as a byproduct of burning wood or fossil fuels. Small amounts of creosote mingle with the smoke that rises to the top of the flue. Along the way, the creosote combines with moisture and adheres to the flue liner or open brickwork of the chimney, creating a thin layer of tar that solidifies as it cools.

Creosote has had plenty of interesting uses throughout history, including as the active component of various medicines. These days, creosote is used in commercial applications to treat and preserve wood for increased longevity and durability. Creosote is responsible for giving smoked meats their distinctively smoky flavor, plus it's also the special ingredient behind artificial liquid smoke flavoring.


Why Is It Dangerous?

Creosote buildup never goes away on its own. Once a layer of creosote forms, it's there for good until it's physically removed. Without proper cleaning, multiple layers of creosote will steadily build up every time you use your fireplace. This buildup causes the flue to narrow, reducing the amount of ventilation available to your fireplace.

The resulting lack of fresh air prevents your fireplace from burning its fuel efficiently, resulting in a smaller, dirtier flame that causes even more creosote buildup. The cycle continues until your flue becomes completely blocked with creosote, rendering your flue liner unusable.

Creosote is also highly flammable, especially when it accumulates in large amounts. Excess amounts of creosote can ignite when exposed to enough heat from your fireplace. Creosote-fueled fires can spread quickly and with little to no warning, making these fires incredibly dangerous. Failure to clean excess creosote buildup is a common factor behind most home heating fires, according to research from the National Fire Protection Agency.


How Does It Form?

There are several stages to creosote buildup. Each successive stage can prove more difficult to deal with than the last, which highlights the importance of tackling creosote buildup at its earliest stages. How soon creosote buildup occurs usually depends on several factors, including the efficiency and overall condition of your fireplace. If you're using a wood fireplace, the quality of the wood being used as fuel can also affect creosote buildup.


First Stage

Creosote buildup starts out as a light coating on the flue. Depending on how efficiently your fireplace burns its fuel, the creosote buildup will mostly consist of soot with small amounts of tar mixed together. As a result, the initial stage of creosote buildup appears thin and flaky.

The first stage of creosote buildup is always the easiest to deal with. Fireplace technicians can remove creosote buildup using special-purpose brushes, preventing additional, harder-to-remove layers from forming.


Second Stage

As the creosote buildup continues, the soot is replaced with more tar, giving the creosote a thicker, harder, and sometimes shinier appearance. The overall texture of the buildup remains dry and crumbly, however.

Brushing alone won't remove second-stage creosote buildup. Rotary loops and chemical solvents are the usual go-to tools for fireplace technicians when battling creosote buildup at this stage.



Third Stage

Left to its own devices, the creosote buildup eventually turns into a highly concentrated mass that appears oily and feels sticky when fresh. Repeated exposure to heat usually gives this mass a hardened, shiny appearance. At this stage, a simple cleaning may be extraordinarily difficult, if not impossible. Some technicians even encourage a complete replacement of the flue liner as a more cost-effective alternative to cleaning.



How Can It Be Prevented?

Since it's a naturally occurring byproduct of the combustion process, there isn't much you can do to completely stop creosote buildup in its tracks. However, taking a proactive stance on fireplace maintenance will help prevent excessive creosote buildup.

Fireplace technicians can spot and take preventive action against the beginnings of excessive creosote buildup during regularly scheduled fireplace checkups. These checkups also ensure that the flue's inner mechanisms are working properly, significantly reducing the rate of creosote buildup.

Most experts recommend having your fireplace inspected on an annual basis. Flue cleanings should be done when there's a 1/8-inch deposit of creosote in the flue.

Prevention is always the key when it comes to creosote buildup. The sooner you can tackle the buildup, the easier it'll be to deal with. To learn more about the effects of creosote buildup or to schedule a professional inspection, contact us at Hartman Heating , Air and Fireplaces today.
By Admin 16 Oct, 2018
The fireplace is a great spot for Halloween decorations. However, take some precautions and use these tips when decorating your fireplace for Halloween.
By Admin 17 Sep, 2018
Learn why you should replace your analog thermostat, what the alternative options are, and what the ideal placement for any thermostat is.
By Admin 16 Aug, 2018

From supplementing your HVAC system in the winter to adding an appealing focal point in any room, you have several reasons to install gas or wood fireplace in your home. Have you decided that a fireplace is a great investment but are not sure if a gas or wood model is the best option for your home, family, and budget?

Do not agonize over this decision. Instead, here are a few tips and factors to help you determine if you should choose a gas fireplace or a wood fireplace for your home.


Cost of Installation

The cost to install either a gas or wood fireplace is dependent upon several factors. You have two common types of gas fireplaces in homes: gas inserts and built-in models. You install a gas insert inside an existing firebox, while you install a built-in in the wall. With the built-in fireplace, you do not need to have a firebox already in your home.

A freestanding wood stove typically costs less to install a traditional built-in wood fireplace. This is because if you opt for a built-in wood fireplace, you pay for the cost of labor and components, including the masonry.

You have other factors that impact the cost of installing either a gas or wood fireplace. If you lean toward gas, you will need to install a new propane or natural gas line if one does not already exist. Additionally, you will need to decide if you want to install a ventilation system.

For wood fireplaces, you will need to factor in the cost of replacing an existing fireplace, including the surround and firebox, and the price of installing a new chimney or repairing the existing chimney.


Cost of Fuel

The typical fuel source for a gas fireplace is either natural gas or propane. The price of either will vary throughout the year depending upon several factors, including supply, the time of year, petroleum prices, and state of the economy.

Because prices and availability fluctuate, contacting a professional to help you determine which option is best for you is a great way to ensure you choose the right product.

The costs to install either a built-in or gas insert model are about the same.

The cost of fuel for a wood fireplace is typically much less, especially if you have a readily available supply of trees on your property. The cost of wood is far less than natural gas or propane, but this can be more time-consuming to gather, cut, stack, and store the wood. Keep this in mind, especially if you do not have a place to store wood on your property.


Cost of Maintenance

The cost to maintain a wood fireplace is typically higher. If you choose a wood-burning stove, you will need to clean it periodically and schedule an appointment to have a professional inspect the unit at least two to three times per year. If the wood stove does not properly combust the fuel, the stove will not run efficiently. Maintaining a built-in wood fireplace will also cost more on average.

In addition to inspecting and cleaning the firebox, you will also need to have a professional inspect the chimney at least once a year . Luckily, you have professionals who can handle these jobs and will ensure that your built-in wood fireplace is also in amazing shape.

A gas fireplace is typically very easy to maintain and care for. If the fireplace has vents, hiring a professional to inspect and clean it at least once a year will prevent clogs.


The Look of Gas or Wood

The aesthetic appeal and the homeowner's taste is a huge factor when considering whether to pick gas or wood. If you have a more modern home, a sleek glass fireplace is a great option. You have several varieties of built-in and insert fireplaces, including models that feature glass logs, stones, or coal. You can even purchase a gas fireplace with a remote control.

If you have a more traditional home or simply prefer the classic elegance of a brick or stone facade and mantel, consider a wood fireplace. Many homeowners also prefer the smell and feel of a traditional built-in wood fireplace as well.


Resale Value

A recent survey of homeowners found that as many as 40 percent  would pay more for a home that features a fireplace. Whether you choose gas or wood, installing a beautiful fireplace in your home is always a smart investment. If you want to sell your home in the future, ask a local real estate agent about which type of fireplace that homeowners in your area prefer.

From the potential resale value they add to the cost of installation and maintenance, several factors exist that you should consider when deciding to choose a gas or wood fireplace for your home. If you have any further questions, contact the professionals at Hartman Heating, Air and Fireplaces .

Show More
Share by: